Pelican x Dead Air

RESONANCE 
Laurent from Pelican and Will from Dead Air teamed up to create an inspired reverb with its own character and texture - based on the idea of creating a reverb that feels like it's interacting with your playing and resonates in interesting ways.  On this journey they took some unusual paths, starting from the foundation of the Belton Brick and weaving a design around it that pushes into unique territories - straddling the lines between out of control oscillation and lengthy decay with evocative depth. 

FEEDBACK
Here the reverb signal is routed back into its input, creating longer decays and self oscillation. The FEEDBACK control is extremely interactive with the REVERB knob, yielding numerous sweet spots with different amounts of swirling highs, and haunting atmospheres. Turn down for tighter, cleaner reverb sounds, and turn up for increased atmosphere and vibe.

ALTERNATE (FOOTSWITCH & KNOB)
Here is an alternate routing for the feedback path of the reverb.  Set high and use it to create reverberated blooms or swells, or all out self-oscillating cacophonies.  Set it low and use it to tighten up the reverb for punctuated moments or reign in some chaos. This alternate feedback path will only be enabled while the ALTERNATE footswitch is held down, making it easy to incorporate into any performance. 

REVERB
This controls the volume of the reverb in the signal path. All the way down is no reverb, and while all the way up isn't 100% wet, the reverb will be washing over the dry signal leaving almost no trace in its wake. 

VOLUME
The output volume of the pedal, with a healthy amount of boost on tap for making sure your signal still cuts through the mix.  Alternatively, set the volume below noon and use it to clean up a dirty amp for a pseudo clean channel!

POWER
Standard 'Boss-style' 9V DC Power with a Center Negative tip. (not included) 9V - 18V Only. 80mA current draw. No option for battery power. 18V operation will sound cleaner and more hifi. 9V will have more texture and character.